Backstrap Weaving – Time for a new Tool

One weaving tool which hasn’t really made its way into my kit is the temple, an instrument that helps weavers maintain consistent width in the cloth they are producing. I have never really felt the need to use a temple and that’s most likely because I haven’t used my backstrap loom to create the kind of cloth that I felt required one. The ladies with whom I studied in Guatemala used temples. They were wonderfully simple tools….a piece of bamboo that sat underneath the cloth with a couple of small nails holding it in place.

I have to admit that I would cringe every time we pushed those nails into the edges of the woven cloth. When I took the pieces that I had started weaving with my teachers in Guatemala back to Bolivia to finish, I continued using the temples for a while. However, I soon abandoned them as I really felt that they weren’t doing anything for me. I have seen some fine Bhutanese textiles with horrible holes gouged at intervals into the edges from the sharp ends of the temples and that, more than anything, has really put me off using them.

But, now as I am typing, I am remembering that there has actually been one piece of cloth that I wove where I could see a clear need for a temple. It was a wide silk piece that I wove some time ago. I did manage to get away without using a temple because I couldn’t bear the thought of pushing nails or even pins into the edges of the silk.

When weaving this wide piece, I was finding that the cloth would ripple slightly as I propped the shed open ready to pass the shuttle. I had to try and grab the edges of the cloth, first one side and then the other, to straighten and smooth the cloth so that I could be sure that I was laying in the right amount of weft. A third hand would have been handy! It was clumsy and slowed me down but I was willing to do it to avoid using the ”dreaded” temple.

My Montagnard (Vietnamese hill tribe) weaving teachers used wooden temples with carved pointed tips for the cloth they wove on their backstrap looms. They even used them for narrow bands…

And, my weaving teachers in coastal Ecuador who wove on vertical looms rather than backstrap looms, used a similar style of temple cut from a large tube of bamboo that they attach to the upper face of the cotton cloth on the loom. I remember really struggling to bend that slat of bamboo into place each time it had to be re-positioned on the cloth. This heavy-ish sturdy cotton did not suffer at all from the pointed tips of the temple.

Why all this talk of temples? Well, I would like to weave another sheer cotton piece like the one I just wove but using much finer cotton. I don’t have a reed that is fine or wide enough for the piece I have in mind and so I will have to resort to trying to maintain the sett and width by other means just like the Guatemalan weavers in Alta Verapaz do. The temple will help with the width. Maintaining the sett will be another story! What tool do the ladies in Guatemala use?….skill and lifetimes of experience and know-how passed down through generations!

Until I get the fine cotton singles that I would like to use, I will practice with the little bit of hand spun cotton that I have left over from my most recent project. For that project I used a reed and so I have a sample from which to take calculations for width and something to guide me to determine and try to maintain the spacing between warp threads. I have wound a short warp with half the number of ends that I used for my scarf. Wish me luck!

Here are some bits and pieces I have gathered together for possible temples…

The piece at the bottom of the picture is the temple that came with a Karen loom that a friend gave me. Pins have been taped to a piece of wood and the temple was sitting on the back side of the warp-faced cloth. The bamboo pieces are the temples I was using with my teachers in Guatemala. The nails that pierced the cloth and then turned into the open ends of the bamboo, are sitting on top of the tongue depressor. I was wondering if cutting points into a piece of heavy cardboard like the black stuff you see there and reinforcing it with a tongue depressor would also work.

Or, there’s this….contributed by friend Franco to the backstrap weaving group on Ravelry many years ago…

It was working well for Franco. I would love it if I could get something like this to work for me. It measures and maintains width all at once!

As for my current project…it is finished! Except for the very first part which I un-wove and turned into fringe, I got a consistent 9 1/8 inches of width.

First patterns underway.

After finishing the hem-stitching the far end, I slowly unrolled the cloth and worked my way back to the start, burying weft ends as I went. Then I  cut the weft out of the first wider part of the cloth and hemstitched that end.

Here it is off the loom waiting to have its fringe twisted before being washed and pressed.

Procrastinating! Enjoying the cloth and taking pictures because I was nervous about what was going to happen to it when it was washed!

Moe procrastination…yes, it’s sheer now but will it lose this translucency when it has been washed?

A whole day has gone by. Tomorrow I’ll wash this thing.

Post-wash and press: it lost between 1/8” and 1/4” in width and the warp threads moved closer together ever so slightly. It feels so soft!

Post-wash cloth with twisted fringe.

Post-wash verdict: I love this super soft supple cloth that is so unlike anything I have woven before!

Now I am thinking about dyeing it. Should I?

During all the pre-wash dithering, I decided to take a sample that I had woven before my last trip away and make it into something. You might remember that I wanted to make a wool shoulder bag with a built-in pocket in the style of the ch’uspas (coca-leaf bags) that the Bolivian weavers make. I learned how to set up the warp and weave the pocket back in 1997 with my teachers in Potosí. This small green piece is the wool sample that I most recently wove to refresh my memory of the technique. I edged the little pocket with triple cross-knit looping.

I decided to go ahead and make this into a little zippered pouch. I edged it with a tubular band style that is woven in Chahuaytire, Peru which also served as the strap. The bottom is decorated with coil stitches and the pocket is edged with single cross-knit looping. A four-strand braid makes a nice zipper tab.

The wool surface loved to attract the stray bits of cotton that I have had flying around during my latest project.

I had started gathering materials for this project before I had finished weaving the cotton scarf. I thought about what I could possibly fit into the tiny pocket and found that my door key sat within it perfectly. Two days later when I wanted to go out, I turned my apartment upside down looking for my door key. I was locked in and had completely forgotten about having placed the key in the little pocket. I had to call a friend who keeps a spare for me to come and let me out. Another two days went by before I picked up the little green bag once more to work on it and discovered the secret contents of the little pocket. Duh!

So….I guess the hand spun-cotton-with-temple experiment is next. I have also wound my skeined silk into balls ready for warping. I am thinking about weaving a silk cowl….just a simple tube to drape around my neck instead of a whole scarf. At three-and-a-half months into the grey hair transition I am still thinking about wearing color around my face to brighten things up a bit. Until next time……..